By Daniel Cook Design • Do It Yourself • 0 Comments

5 Awesome Parking Lot Lighting Ideas For Your Property

When trying to find the perfect lighting for your parking lot there are a few factors to consider. The first one being cost. The cost of the light itself and then the cost of all the electricity that light is going to use over time.

The second factor is brightness. There is no reason to bother spending money on a light that is not going to illuminate your lot. A big reason for parking lot lighting in Austin Texas is to make people feel safe, dim lights in a dark parking lot do not accomplish that.

Finally, you need a light professional that can provide you with light that can withstand any kind of weather. A light that breaks in a storm is not going to help anyone park and is a waste of money. Here are five of the lights that meet these standards with a few extra perks to make them above the rest.

1. AntLux 150W LED Parking Lot Lights Shoebox Pole Light 5000K, 450W

This light is a great choice for many reasons. The most important being the amount of money and energy it saves you. The AntLux 150W can cut your electricity bills by seventy-five percent without sacrificing any of the light quality it promises.

The Antlux LED is probably the brightest choice you can make for your parking lot. With 18,600 lumens, this light can make your whole parking lot look like the sun is still out. It is an incredibly bright light to make sure your patrons feel safe and the cars parked in your lot are safe.

It is a light made for the outdoors so you can expect it to last through rough weather. Conveniently, it also fits on round or square poles making installation simple and universal. This light is absolutely something every person who has a parking lot should take a look at.

2.  EverWatt 150W Waterproof LED Outdoor Parking Lot Light with Photocell Sensor

If you are looking for an outdoor light that provides daylight brightness and can withstand harsh weather then look no further. Like all LED lights, this light saves you energy and money. It gives off 20,500 lumens which allow for fewer energy requirements.

The EverWatt 150W lasts for up to 150,000 hours. That means you will almost never have to change it. This light also can turn on and off automatically or manually, allowing you to control which hours you want the light to run.

Finally, this light is weatherproof. It is rated IPX67 which is the level most water-resistant smartphones and headphones are at. That makes this light a great, safe choice for any parking lot.

3. RuggedGrade 450W LED NextGen Parking Lot Light

middle image large

The first thing to note about this light is that it is expensive. This is certainly not the cheapest light on this list or any other list. It is, however, and excellent light for your parking lot.

This light is also incredibly energy efficient. Requiring only 450 watts while giving you 60,000 lumens.  The RuggedGrade 450W is very low on energy consumption which could end up saving you the extra money you spent on the light itself.

The RuggedGrade 450W is a very lightweight light with long-lasting LEDs. It comes with all the accessories which make installation easy and cheap. It might be an expensive light but it is built to last and makes up for the price by saving you tons of energy.

4. STASUN LED Flood Light 300W 27000lm LED Outdoor Security Lights

This is probably the prettiest light on this list. If you want an aesthetically appealing light that provides the same incredible brightness as the other lights on this list then look no further. Since it is made with LED lights it is also energy efficient.

One of the coolest things about the STASUN LED is that it offers shadow-free lighting. This floodlight has three huge light panels that allow the entire area you need to be illuminated to be brightly lit without any dark areas. That is incredible for security purposes and just makes your parking lot look nicer.

This light comes with a PC lens that keeps your light from fogging up due to weather. It is built to last outside while giving off an incredible, unobstructed light. The STASUN LED is one of the best outdoor lights on the market without question.

5. LEONLITE Ultra Bright LED Parking Lot Light 150W

The LEONLITE is bright enough to be used in both stadiums and parking lots. It is not dimmable but it is certainly bright enough to make everything in your parking lot easily visible in any light. This light can be adjusted to hit any angel making your whole parking lot easy to illuminate.

One of the best things about this light is its heavy-duty design. It is weatherproof so that it can last outdoors in any kind of weather. It also has a sturdy aluminum outside that keeps the LEDs from overheating.

This light requires very few watts. It uses only 150W to give 18,000 lumens, that many lumens usually require about 450W. Overall, this is an excellent light for your parking lot that will remain bright as long as you need it to.

To Conclude

bottom image large

Finding the right outdoor light for your parking lot is harder than many people expect. There are a lot of things to consider and too many lights on the market to look at every single one. Luckily, it is easier to narrow down the necessities in a light.

Looking for lights that save you money usually means you are going to want an LED light. If you want a light that will last then you need to make sure it is weatherproof and not prone to overheating. Finally, the light needs to be bright enough to make your parking lot safer.

This list shows a few of the best parking lot lighting options on the market. Make sure that you look for lights with similar attributes if none of these lights are exactly right. All of this will help you find an awesome parking lot lighting fixture for your business.

By Daniel Cook Do It Yourself • Tips and Tricks • 0 Comments

How to Install a New Light Fixture in Your Kitchen

You’ve just brought home a brand new light fixture and decided it’s a job that you have the time and gumption to do by yourself. But because you’re careful, you wouldn’t mind a little guidance. First of all, pat yourself on the back. There’s just something different about the feeling of accomplishment from doing something yourself. That’s why we LED LYSI Austin, Texas have put together this quick guide as assistance for installation.

Tools Needed

Screwdriver, Wire Cutter, Ladder

Step 1 Turn off the Power

This one seems simple enough but believe it or not, electric shock from DIY projects like this is not uncommon. Sometime when there are enough distractions or when we are in a rush we forget. SO TURN OFF YOUR POWER. At your breaker box, locate the control for the room where you’ll be working and flip the breaker to the “ Off” position. Then go to the place or area and test the light switches and outlets to make sure everything is dead. And only once you have checked twice should you move on to the next step.

Step 2 Remove the Existing Fixture

Remove the cover of the old fixture. Remove the old wire connectors, and untwist the fixture wires from the installed wires. Remove the base or trim from the old fixture.

Step 3 Connection of New Fixture Wires to Existing Wires

Follow the manufacturer’s instructions for matching the wires on the new fixture to the wires installed in your home.

Typically, the black wires connect to each other, and the white wires connect to each other. A grounding wire, which is either green or copper, connects to a grounding screw or copper wire. Wrap the bare section of each fixture wire to the bare section of its corresponding installed wire, and screw on the wire connectors. Connect the grounding wire.

Step 4 Secure the Base or Canopy

 Fold the wires into the electrical box or a void in the base or canopy. Use the included hardware to attach the fixture base or canopy to the electrical box. Have a helper nearby in case you need a third hand, especially if you’re replacing a fixture with a high ceiling. Attach the trim and cover to your light fixture. If your fixture is a pendant or hangs by a chain, make necessary adjustments to the length.

See, not so terrifying after all. We just ask that you please remain safe and remember if you have questions you can contact LED LYSI. This is also a great time to install LED bulbs in your fixture. Click here for options from LED LYSI or for more tips and ideas!

By Daniel Cook Design • Do It Yourself • 0 Comments

Value Engineering through Lighting

If you’re a project manager or contractor then you’ll want to read this! But we know that you’re probably looking at this on your phone and don’t have a lot of time, so here are the main points.

  • The Lighting fixture market is tightly controlled by agents who make sure only a select few receive competitive pricing.
  • The lighting fixture schedule takeoff is the easiest way to cut costs on a project.
  • Ask the engineer, client, or general contractor if any fixtures can be value engineered to optimize savings.

The Way Things Are

What if I told you that the lighting fixture market is tightly controlled by agencies that make sure only a select few receive competitive pricing? What if I told you that certain manufacturers and their agencies will only provide pricing to electrical contractors through an electrical supply house? That’s 3 levels of markup before you ever see the price. What if I told you, that if you didn’t introduce the opportunity to the agent or manufacturer, you are never going to receive the lowest price? That’s why, when you ask for pricing on large bids sometimes, they will ask for the address or job name. So they can make sure they are giving the best price to who they want to. That’s just the way things are!

Late To The Party, Now What?

Whether you’re an estimator, general contractor, or electrician, picture this scenario. You’ve received the plans for a project and want to maximize your potential to save costs and win the job. Where can you start? Lighting. Lighting is one of the easiest and fastest ways to value engineer a project while still providing a quality product(s). Hundreds to thousands of dollars can be shaved off the “would-be” bid by using a different manufacturer or source to procure the requested items. The exact amount depends on the counts and project scope, but with the right approach, it can be done.

How Do I Find Out?

Often times, just reach out to the contact that provided the bid. Sometimes, you have to reach out to the project design and architects at the front pages of the project plans to ask if the lighting fixture schedule is a “hard-spec.” Ask if alternates are acceptable as long as they match specifications and are approved. Offer to submit product sheets for pre-approval. The process itself really can be that simple.

Here is where LED LYSI Lighting can help:

  • We can cross the products for you.
  • We can provide all product and design sheets for the alternate products.
  • Oftentimes, we can even provide pricing on the original products and prepare two quotes for submittal.
  • We can even provide samples when requested.

Let LED LYSI help you win that job or (if you’ve already won) maximize your profitability and savings for the end client. We’ve done this for many contractors and electricians already in Central Texas.

rawpixel 558596000000unsplash large

By Daniel Cook Do It Yourself • • 0 Comments

Everyone can paint, so do you!

If you are looking to shift to a new house or want to renovate your existing one, the first thing you will need to think about is the painting. While it may be tempting to hire a professional to do it if you have never painted before, it will cost you a lot of money. Painting your own house allows you to experiment with something new and will help you save thousands of dollars.

Read more